Air Conditioner Repair Etobicoke
CALL NOW – (416)639-2009
AIR CONDITIONER REPAIR
If your AC stops working during a hot summer night when the heat is unbearable, will turn from simply annoying to an emergency. ┬áLet Oakville Appliance Repair be your knight in shining armour, and take care of all your Air Conditioner repair needs.
Through the Wall Air Conditioners
Wall air conditioning units are much like window air conditioning units using the primary difference because they sit inside your wall rather than inside a window opening. These models exhaust humidity in the room towards the outdoors and fit via a hole in an exterior wall. They might require a sleeve; that is a metal device store the act within the wall to aid the weight. If you have a sleeve installed, you will need to identify what kind it is. Should there be no existing sleeve and you have to place a hole inside your wall, professional installation is suggested.
Slide-out chassis versus. through-the-wall chassis sleeves
Slide-out chassis air conditioning units be one unit – the frame and also the sleeve. These models vent through the sides and the rear of the AC. Through-the-wall air conditioning units are not equipped having a sleeve. Sleeves are offered individually to the models that only vent through the back of the AC.
Ductless or Small-Split Air Conditioners
Ductless, Small-Split systems tend to be more energy-efficient than ducted central air, and could be ideal for cooling multiple rooms inside a house without ductwork. They combine an outside compressor and condenser with some indoor air-handling models. To set up a ductless AC, you will have to purchase tubing, which connects the indoor and outside models. Each indoor unit is set up in another room and just cools down that room, much like a window unit. They operate very silently because the compressor is outdoors.
Single zone versus. multiple zone models
Just one zone has one indoor unit, while multiple area models might have 2 to 4 indoor models. Each unit could be set to a new temperature and processes individually.
Central Air Conditioners
Central air systems make use of ducts to distribute cooled air throughout the house.
With a “split system”; the most universal design; the refrigerant runs between an indoor coil and a matching outdoor condenser with the help of a compressor. The refrigerant cools the air while dehumidifying it. A blower then circulates the air through a series of ducts throughout the house.
Heat Pump AC units are typically installed, in regions with moderate cooling and heating needs. Throughout the cooling season, heat pumps move heated air out of your home to the outdoor pump. Throughout the hot seasons, they are doing the opposite. Systems with heat pumps are typically in use for cooling for a minimum of seven months a year.